Dräger RD DIN40 gas mask filters (40 mm thread) - X-Plore

X-plore Rd40 DIN 40mm gas mask filters

The Dräger X-plore respirator filters in compliance with the EN148-1 standard have a 40mm thread connector and can be combined with a large number of half-masks and full mask meeting the EN136 or EN140 standards. 40mm thread filters are offered by most respiratory protective masks manufacturers, thus making available a very wide gas mask filter range.

Dräger X-plore Rd 40 filters efficiently and inexpensively remove contaminants from ambient air, whether in the chemical, automotive, metallurgy industries, shipyards or waste collection and treatment works.

The Dräger X-plore Rd40 respirator filters range

The X-plore Rd 40mm filters range presents different types of filters for all common applications. It offers protection against many toxic substances, from organic vapors to radioactive iodine.

• Aluminum housing: aluminum housing makes it easy to detect any damage to the filter, allowing increased safety.
• Individual resealable packaging: filters are individually wrapped to guarantee optimum protection of the unused filter.
• CE marking: All filters bear the CE marking, in compliance with EN 14387 and / or EN 143: 2000 standards.

X-plore Rd 40mm gas mask filters technical specifications

X-plore particle filters

• Connection to mask: Standard EN 148-1 threaded connection RA (Rd 40mm x 1/7 ")
• Materials:
  - Filter housing: Polypropylene
  - Particulate filter: Glass microfibers, cellulose fibers, additives
• Dimensions: Outside diameter: 110 mm
• Height (with thread and plugs): 57 mm
• Weight without packaging: Approx. 70 g

X-plore 40mm gas filters

• Connection to mask: Standard EN 148-1 threaded connection RA (Rd 40mm x 1/7 ")
• Materials
  - Filter housing: Aluminum with internal treatment
  - Absorbing agent: Activated carbon
• Dimensions: Outer diameter: 92 mm
• Height (with thread and plugs): 90 to 100mm depending on the filtration type
• Weight without packaging: from 255 to 290 depending on the filtration type

X-plore 40mm combined filters

• Connection to mask: Standard EN 148-1 threaded connection RA (Rd 40mm x 1/7 ")
• Materials
  - Filter housing: Aluminum with internal treatment
  - Absorbing agent: Activated carbon
  - Particle filter: Glass microfibers, cellulose fibers, additives
• Dimensions: Outer diameter: 108 mm
• Height (with thread and plugs): 90 to 100mm depending on the filtration type
• Weight without packaging: from 260 to 340 grams for conventional combined filters and up to 490 grams for very powerful filtration like A2B2E2K2Hg-NO-CO20-P3