Half mask for respiratory protection Rd40 ST85
The ST85 is a half mask for professional respiratory protection, durable and decontaminable with a 40mm threaded front connector in compliance with the EN148-1 standard, compatible with all RD DIN40 filter cartridges on the market. It is ideal for the protection of operators handling harmful substances, paints, solvents and dusts.
The major advantage of the ST85 half mask is its ease of use. The quick-donning headgear keeps the mask comfortably in place. The four quick-adjust buckles allow the half mask to easily fit the user's face. The anatomically shaped EPDM face piece is soft and comfortable to wear, yet robust. Detailed description
The ST85 half mask respiratory protection complies with the requirements of the European standard EN140:1998. It is CE marked and classified as personal protective equipment of Category 3.
Half masks (like all air purifying respiratory protection devices) cannot be used in environments where the oxygen concentration is less than 17% by volume.
The ST85 half mask can only be used with filters weighing less than 300 g.
RD 40mm EN148-1 universal filters
The RD40 EN148-1 filters, light and efficient, have an RD40 connector (standardized DIN thread of 40mm). They are compatible with half-masks and full-face masks standardized to EN148-1 (all brands).
A very wide range of filter cartridges ranging from P3 filters (solid particles and aerosols) to ABEK2Hg-P3 filters (maximum chemical risks) including the REACTOR filters.
Technical specifications of ST85 respiratory protection half-mask
- Type: Single filter Rd40 (40 mm universal thread), EN148-1 compliant
- Weight: 120 grams
- Materials:
- Half skirt: EPDM
- Flange set: Elastic band
- Nuchal arch: Molded polypropylene
- Exhalation valve: Rubber diaphragm on a plastic support and protected by a snap cover
• Bayonet fasteners: Impact and solvent resistant plastic - Respiratory resistance (test at 160 l/min):
- Inhalation: 1.2 mbar
- Exhalation: 1.7 mbar - Certifications:
- EN140:1998 (minimum requirements for half masks and quarter masks)
- Regulation (UE) 2016/425 on personal protective equipment
Manufacturer | Spasciani |
---|
Worldwide delivery
International delivery in compliance with international transport regulations (IATA, AMDG, ARD).
On demand "lithium" and "dangerous goods" regulated packaging.
Learn more about our worldwide shipping solutions.