CO, H2S, SO2 or O2 single gas detector - Pac 6500

The Pac 6500 single gas detector

Easy handling thanks to clear user guidance

The D-Light LED indicates if the device is properly working and whether it is ready to use. The Pac 6500 single gas monitor's housing is also designed for maximum safety: each sensor variant features clearly visible colour coding, thereby minimising the chance of mistakes.

User-friendly display with all important information

The large display is word-free and clearly indicates the respective gas concentration. Other important information, such as the battery capacity of the gas monitor, is also displayed. The bright backlighting ensures that all values are clearly legible in the dark.

Audible, visual and vibrating alarm

If the Pac 6500 measures hazardous gas concentrations, it sets off an audible, visual and perceptible vibrating alarm. Two bright, flashing LEDs on the top and bottom of the device ensure that the alarm is easily visible from all sides. The acoustic signal reaches a volume of 90 dB. The display can show the peak concentration measured at any given moment. Earlier alarms registered can also be retrieved at a later time even if they have been acknowledged.

Water- and dust-resistant

The Dräger Pac 6500 single gas detector is protected against water, dust and other foreign bodies by a special membrane filter. When the filter becomes heavily soiled in use, user can quickly and easily replace it. The device is then ready to use again right away.

Data logger and event logger

The Pac 6500 single gas monitor logs concentrations and events along with the date and time. The data can be loaded on a PC via an interface and processed further there.

Pac 6500 single gas detector technical specifications

• Dimensions without clip (Wl x H x D): 64 x 84 x 20 mm
• Weight: Approx. 106 g (113 g with clip)
• Battery service life:

• 2 years for CO, H2S or SO2

• > 10 months for O2 sensor

• Protection class: IP68
• Air pressure: from 700 to 1 300 hPa
• Air humidity: from 10 to 90 % relative humidity, non-condensing
• Temperature: -30 °C to +55 °C
• Approvals: cCSAus, IECEx, ATEX, CE