Automatic gas solenoid valve 6 bar – ELK800

6 bar automatic gas solenoid valve

ELK800 series automatic gas solenoid valves are used to control and regulate gas flow up to 6 bar of supply pressure.

These automatic safety gas solenoid valves – Normally Closed – are designed to shut down a gas supply through lack of tension thanks to their positive safety operation. Indeed, they need constant power supply to let the gas flow and automatically close in case of voltage deficiency to the coil.

NC gas solenoid valve class A – Group 2 – EN161

ELK800 gas solenoid valves are normally closed (NC) solenoid valves. At rest, a spring acts on the valve plug to close the gas flow. Once the coil is powered, the valve opens. When the power supply is being shut down, the valve swiftly closes.

ELK800 gas solenoid valve technical specifications

• Connectors:

- Threaded F/F gas 3/8” at 2”

- Flanged PN16 UNI 2223 from DN65 to DN150

• Power supply: 230V - 50/60 HZ (Upon request: 110V-50/60 Hz / 12/24V AC/DC)
• Maximum operating pressure: 6 bar
• Opening/closing times: <1second
• Ingres protection: IP 54
• Cable gland: DIN PG 9 plug
• Pressure taps: 1/4“on two sides
• Standard: Designed according to current EN161 standard

Technical specifications

• Connectors: - Threaded F/F gas 3/8” at 2”- Flanged PN16 UNI 2223 from DN65 to DN150
• Power supply: 230V - 50/60 HZ
• Upon request: 110V-50/60 Hz / 12/24V AC/DC
• Voltage margin: -15% to +10%
• Operating temperature: -15 °C to +60 °C
• Operating pressure: 200 – 360 mbar
• Opening/closing times: <1second
• Ingres protection: IP 54
• Cable gland: DIN PG 9 plug
• Pressure taps: 1/4“on two sides
• End of course: upon request
• Standard: Designed according to current EN161 standard
• GASTEC PIN approval: 63AQ1350

Other specifications:

Only NPT (threaded) versions are stored.

For flange versions, average delivery time is 1-3 weeks depending on the size (contact us)