Portable multi-gas detector X-am 5800 (Ex, O2, CO, H2S, NO2, SO2 )
The X-am 5800 portable multi-gas detector has been specifically designed for the most demanding industrial environments, such as petrochemical sites, confined spaces, or potentially explosive areas. It can simultaneously measure up to 6 gases (explosive gases, O₂, CO, H₂, H₂S, SO₂, NO₂, NH₃, HCN, PH₃, C₂H₄O, NO, Cl₂, O₃, COCl₂, CH₃NH₂, VOCs, amines, odorants, etc.).
Rugged, intelligent, and highly customizable, it combines high performance, advanced connectivity, and durability, while seamlessly integrating into existing equipment fleets. Detailed description
CatEx SR and PID HC neo Sensors
The CatEx SR catalytic sensor provides fast and robust detection of flammable gases and vapors such as methane, propane, gasoline, nonane, etc. It is resistant to shock and sensor poisons like silicones. Additionally, the XD-IR infrared sensor enables drift-free detection of flammable gases or carbon dioxide with excellent accuracy (0.01 Vol.-%).
The PID HC neo sensor allows for the measurement of volatile organic compounds (VOCs) such as isobutylene or benzene.
Long-life electrochemical sensors
The X-am® 5800 is equipped with compact, precise, and durable XXS electrochemical sensors (up to 5 years lifespan for some). It can accommodate single sensors (e.g., CO, H₂S, O₂) or dual sensors (e.g., O₂/CO, H₂S/CO), allowing for a customized configuration to fit every need. Their low power consumption and high stability help reduce operating costs.
Ergonomic and robust
Compact, lightweight, and designed for demanding industrial environments, the X-am® 5800 features an ultra-durable housing that is waterproof and dustproof (IP68), and drop-tested up to 2 meters. It has large buttons suitable for use with gloves, a clear and easy-to-read display, and a sturdy clip with a D-ring for secure attachment. An optional green D-light LED indicates the device is ready for use.
Maximum safety
Approved for use in Ex zone 0, this detector ensures optimal safety in hazardous environments. Its design ensures effective gas entry, even in the case of partial obstruction—for example, when stored in a pocket or if a gas inlet is accidentally covered.
Innovative Area Monitoring
The X-am® 5800, compatible with the X-zone 5500/5800 beacon, enables wireless area monitoring—ideal for team deployments. Connected to the Gas Detection Connect software, it allows real-time monitoring and enhances on-site safety.
Data management and analysis
Fully compatible with Dräger Gas Detection Connect, it enables optimized device fleet management. Thanks to smart data storage and real-time transmission, it offers advanced measurement analysis, helping to support decision-making and on-site safety. Moreover, information is accessible via a web browser, ensuring easy data access wherever you are.
Diffusion or Pump Mode
The detector can be used in diffusion mode or with an external pump (up to 45 meters of tubing) for remote measurement in tanks, wells, or other confined spaces. Switching between modes is simple and tool-free. The external pump is compatible with accessories from previous series (X-am 2500, 5000, 5600).
Maintenance included
This device comes with included maintenance, to be performed twice a year, ensuring proper equipment operation.
Caractéristiques techniques X-am 5800
- Measuring Range:
Simultaneous detection of up to 6 gases,
Flammable gases via CatEx SR catalytic sensor or XD-IR infrared sensor: CH₄, C₃H₈, C₅H₁₂, C₉H₂₀, H₂, CO₂
Other detectable gases: O₂, CO, H₂S, SO₂, NO₂, NH₃, HCN, PH₃, C₂H₄O, NO, Cl₂, O₃, COCl₂, CH₃NH₂, VOCs, amines, odorants
PID HC neo sensor for volatile organic compounds
Special XXS sensors for specific gases
Optional combo signal: IR LEL + XXS H₂ HC sensor - Alarms:
Ultra-bright 360° visual indicators
Optional green D-light (for calibration readiness)
Audible (90 dB at 30 cm) and vibrating alarms - Dimensions (W x H x D): 130 x 48 x 44 mm
- Weight : 250 g
- Ambient Conditions :
Protection rating: IP68
Temperature: -20 to +50 °C
Relative humidity: 10 to 95% RH - Operating time :
CatEx: 12 h with NiMH batteries
PID: 24 h with Bluetooth enabled
Infrared sensor: 100 h
Electrochemical sensors: 100 h
Charging time: < 4 h - Certifications:
ATEX: I M1 Ex da ia I Ma • II 1G Ex da ia IIC T4 Ga
IECEx: Ex da ia I Ma – Ex da ia IIC T4 Ga
CSA (cCSAus): Class I, Zone 0, AEx da ia IIC T4/T3 Ga;
Class I Groups A, B, C, D – Class II, Div. 1, Groups E, F, G
EAC: PO Ex da ia I Ma X – 0Ex da ia IIC T4 Ga X
Directives: ATEX 2014/34/EU – RoHS 2011/65/EU – RED 2014/53/EU - Warranty: 4 years for the device (electronics and housing)
3 years for XS CO LC, XXS H2S LC, XXS O2 sensors
1 year for the power supply (rechargeable battery)
| Manufacturer | Dräger |
|---|
Worldwide delivery
International delivery in compliance with international transport regulations (IATA, AMDG, ARD).
On demand "lithium" and "dangerous goods" regulated packaging.
Learn more about our worldwide shipping solutions.
- 1 Add products to your shopping cart.
- 2 On «My cart» page, click on the «Move Items to Quote» button.
- 3 If you already have an account, please login, otherwise you can create one or fill in your details directly.
- 4 When your quote is processed, you will receive an email notification with the ability to pay for your order online or under the terms of your pro contract.