Tru Pointe refrigerant gas leak detector

Tru Pointe refrigerant gas leak detector

With significant autonomy and requiring no recharging from the mains, the Bacharach Tru Pointe is perfectly suited for precisely locating refrigerant leaks in air conditioning, refrigeration, cooling or cold storage units.

Tru Pointe main assets

• Quick and precise refrigerant leaks location
• All CFC, HCFC and HFC refrigerants including: R-12, R22, R123, R134a and mixtures R404A, R408A, R409A and R410A
• Patented heated diode sensor with the latest advances in sensor technology
• Sensitivity < 1 second
• High and low sensitivity modes selectable by push button for finer leak detection
• Automatic reset and ambient compensation allowing leaks to be quickly detected in a contaminated atmosphere without the need to manually adjust the sensitivity
• 356 mm long flexible probe to locate leaks in hard-to-reach areas
• No calibration required
• Complete kit including detector, instruction manual, 2 batteries (LR20) and a rigid transport case

Tru Pointe application fields

• Air conditioning, ventilation and air conditioning systems
• Cold rooms and freezers
• Automotive air conditioning system

Tru Pointe portable refrigerant gas leak detector limitations

Exposing the sensor to a stable flow of highly concentrated refrigerants will damage the sensor or seriously reduce its service life, which depends directly on the amount of refrigerant flowing through it. Infrared detectors like the Tru Pointe IR are insensitive to large and repeated refrigerant gas exposure, so they have a much longer lifespan (up to 10 years).

Bacharach Tru Pointe technical specifications

• Detected gas: All CFC, HCFC and HFC refrigerants including: R-12, R22, R123, R134a and mixtures R404A, R408A, R409A and R410A
• Measurement technology: Patented heated diode sensor
• Sensor life: 150 typical hours or one year of normal use
• 2 sensitivity levels: Detection from 4 to 14 g / year
  - High: 4 g / year (0.1 oz / year) and more
  - Low: 14 g / year (0.50 oz / year) and more
  - Sensitivity selectable by push button
• Repeatability: 100%
• Warm-up time: 10 seconds
• Response time: <1 second
• Calibration: None required (automatic calibration) - Automatic recalibration in contaminated areas
• Alarms: Vibrant and audible display (with one-touch inhibition)
• Leak indicator: Green / yellow / red LED
• Power supply: 2 LR20 batteries (supplied)
• Battery life: Minimum 11 hours high sensitivity mode, 20 hours minimum low sensitivity mode, as tested with Duracell Ultra MX1300 alkaline batteries
• Dimensions (without probe): 53.8 × 241.3 × 61.0 mm
• Probe length: 356 mm
• Weight: 530 grams
• Operating conditions:
  - Temperature: 0 to 50 ° C
  - Humidity: 10 to 90% RH (non-condensing)
• Certifications: SAE J1627, CE Marking
• Coding: 0019-8106 Complete kit Tru Pointe